Sun Microsystems Netra T2000, Руководство по обслуживанию

Страница: 59 / 138

Chapter 2 Sun Fire T2000 Server Diagnostics 45
The Automatic System Recovery (ASR) commands (
TABLE 2-10
) enable you to view,
and manually add or remove components from the ASR blacklist. These commands
are run from the ALOM
sc>
prompt.
Note – The components ( asrkeys) vary from system to system, depending on how
many cores and memory are present. Use the
showcomponent
command to see the
asrkeys
on a given system.
Note – A
reset
or
powercycle
is required after disabling or enabling a
component. If the status of a component is changed with power on there is no effect
to the system until the next reset or powercycle.
TABLE 2-10
ASR Commands
Command Description
showcomponent
*
* The
showcomponent
command may not report all blacklisted DIMMS.
Displays system components and their current state.
enablecomponent
asrkey Removes a component from the asr-db blacklist,
where
asrkey is the component to enable.
disablecomponent
asrkey Adds a component to the
asr-db
blacklist, where
asrkey is the component to disable.
clearasrdb
Removes all entries from the
asr-db
blacklist.