Sun Microsystems Fire 6800, Руководство пользователя

Страница: 34 / 66

5-2 Sun Fire 6800 System and Sun Fire Cabinet Rackmount Placement Matrix • June 2003
This section contains hole assignments for Sun Fire 3800 systems and Sun storage
products that can be mounted in the Sun Fire cabinet. Supported configurations are
listed in the following tables. Front and rear holes are the same.
FIGURE 5-2
Sun Fire 3800 System Mounting Bracket Detail
Each bracket is labeled “RIGHT” or “LEFT”. The orientation is when viewed from
the front of the system.
Note –
(*) Indicates the key hole used for rail location.
Caution – When two Sun Fire 3800 systems are installed, you must always have a
1/2 RU metal filler panel in the space above it. Empty space in the cabinet must be
filled with filler panels to prevent the recycling of heated, exhausted air from the
rear of the system. Filler panels range from 1 RU to 5 RU in size.
TABLE 5-1
Rackmounting Order
Sun Fire 3800 System
Mounting Position
Hole Count From Bottom of Cabinet
System #3 (top) Top screw: use bracket key hole #4 at cabinet hole #78
Bottom screw: in slot at cabinet hole #72
System #2 (middle) Top screw: use bracket key hole #2 at cabinet hole #52
Bottom screw: in slot at cabinet hole #47
System #1 (bottom) Top screw: use bracket key hole #4 at cabinet hole #26
Bottom screw: in slot at cabinet hole #20
Key hole #4
Slot
Key hole #2
Slot