Sun Microsystems APOLLO OC48, Инструкция по установке и эксплуатации

Страница: 32 / 78

12 Sun OC48 Packet Over Sonet Adapter Installation and User’s Guide • December 2001
2. Install the software packages by typing at the command line:
3. Press Return to accept the default.
You are now ready to configure the software for PPP. Continue on to Chapter 3 for
the configuration steps.
Removing the Driver Software
1. As superuser, type:
The following list of software packages is displayed.
2. Use the
pkgrm
command to remove the software packages listed.
# /usr/sbin/pkgadd -d /cdrom/cdrom0/Packages/
The following packages are available:
1 SUNWipsm Sun OC-48 Packet Over Sonet Man Pages
(sparc) 1.0,REV=2001.11.19.21.03
2 SUNWipsut Sun OC-48 Packet Over Sonet Utilities to configure network
(sparc) 1.0,REV=2001.11.19.21.03
3 SUNWipsx.u Sun OC-48 Packet Over Sonet Device Driver and Boot Files
(64-bit) (sparc.sun4u) 1.0,REV=2001.11.19.21.03
Select package(s) you wish to process (or ’all’ to process
all packages). (default: all) [?,??,q]:
# /usr/bin/pkginfo | grep ips
system SUNWipsm Sun OC-48 Packet Over Sonet Man Pages
system SUNWipsut Sun OC-48 Packet Over Sonet Utilities to configure network
system SUNWipsx Sun OC-48 Packet Over Sonet Device Driver and Boot Files
(64-bit)
# /usr/sbin/pkgrm SUNWipsm SUNWipsut SUNWipsx