Sun Microsystems 817-4054-15, Руководство по обслуживанию

Страница: 100 / 204

6-14 Sun Fire E2900 System Service Manual • May 2006
9. Close the front door of the system.
10. Power on the system.
See Section 4.1, “Powering On the System” on page 4-1 , and refer to the system
administration manual.
6.4 DVD-ROM Drive
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in its ESD-safe packaging box before placing them on any surface.
The DVD-ROM drive is located at the right front of the system (
FIGURE 6-10
).
6.4.1 Replacing the DVD-ROM Drive
1. Take the system to Standby mode.
See Section 4.2, “Taking the System to Standby Mode” on page 4-2 .
2. Open the right front door of the system.
3. Attach a wrist strap. Place a grounded ESD mat close to the system.
See Section 2.8, “Antistatic Precautions” on page 2-6 .
4. Open the media bay access door at the top of the system. Loosen the latch
securing screw. Lift the latch and raise the cover (
FIGURE 6-14
).