Sun Gold Power Co.,Ltd
www.
sungoldpower.com
10
Note: the wire diameter is only for reference. In case of long distance between photovoltaic array and solar
charge inverter or between solar charge inverter and battery, use thicker wire to reduce voltage drop and
improve system performance.
Note: above wire diameter and breaker are only for reference. Please select appropriate wire diameter and
breaker based on practical condition.
2.3 Installation and Wiring
Installation step:
Step 1:
confirm the installation position and heat dissipation space, confirm the installation position of solar
charge inverter, such as wall surface; to install the solar charge inverter, guarantee there is sufficient air flowing
through the cooling fins of solar charge inverter. At least reserve 200mm space at the left and right air outlets
of the solar charge inverter to guarantee heat loss through natural convection. Refer to the overall installation
schematic above.
Warning:
danger of explosion! Never install the solar charge inverter and lead-acid liquid battery into
a same sealed space or in a sealed place with probable accumulation of battery gas.
