GY-10 Installation Instructions – May 2020
www.uridanaustralia.com.au
Installation Instructions
Parts List
|
Fitting Kit
|
*Toilet seat packed separately – incl. installation instructions
2
x fitting No. 20
1
x uriLOCK 0.3 L
1
x uriCLEAN 0.5 L
1
x uriCLOTH
1
x Cover
1
x suction device
Note
|
EN
If you are retrofitting existing flushing urinals with uridan waterless urinals, please ensure that the sewer line
is jetted and clean of uric scale before installation. Please also remove any existing s-trap to avoid double trapping
the urinal.
The uridan urinals work without water and the urinals should be fitted to a 50 mm waste pipe.
Installation should be carried out by authorized plumbers in accordance with AZ/NZ3500.2.
PLEASE NOTE: The undiluted discharge from a waterless urinal must not be transported through copper or copper
alloy pipework.
4
x screws fitting No. 20
