GX-10 Installation Instructions – May 2020
www.uridanaustralia.com.au
Installation Instructions
|
Parts List
|
Fitting Kit
|
1
x fitting No. 20
1
x uriLOCK 0.3 L
1
x uriCLEAN 0.5 L
1
x uriCLOTH
1
x Cover
1
x suction device
2
x screws fitting No. 20
Note
|
Installation of the uridan waterless urinal is very simple.
If you are retrofitting existing flushing urinals with uridan waterless urinals, please ensure that the sewer line
is jetted and clean of uric scale before installation. Please also remove any existing s-trap to avoid double
trapping the urinal.
The uridan urinals work without water, and must be fitted to a 50mm waste pipe. Installation should be carried
out by authorized plumbers in accordance with AZ/NZS3500.2.
PLEASE NOTE: The undiluted discharge from a waterless urinal must not be transported through copper or
copper alloy pipework.
