GH-10 Installation Instructions – May 2020
www.uridanaustralia.com.au
Installation Instructions
Parts List
|
Fitting Kit
|
1
x fitting No.1
1
x fitting No. 15
2
x screws fitting No. 15
1
x 87° bend
1
x uriLOCK 0.3 L
1
x uriCLEAN 0.5 L
1
x uriCLOTH
1
x Cover
1
x suction device
2
x screws fitting No. 1
Note
|
Installation of the uridan waterless urinal is very
simple.
If you are retrofitting existing flushing urinals with uridan
waterless urinals, please ensure that the sewer line is jetted
and clean of uric scale before installation.
Please also remove any existing s-trap to avoid double
trapping the urinal.
The uridan urinals work without water, and must be fitted to
a 50mm waste pipe. Installation should be carried out by
authorized plumbers in accordance with AZ/NZS3500.2.
PLEASE NOTE: The undiluted discharge from a waterless
urinal must not be transported through copper or copper
alloy pipework.
