Sumo DTS Series, Руководство оператора и список запасных частей

Страница: 20 / 77

20
Figure 3: MAIN screen (dual product / single metering)
Figure 4: MAIN screen (single product / dual metering)
2.2.1 Forward speed display and alarm functions
Display smoothing
Except for sudden changes in speed, the forward speed displayed at any moment will be the
average speed calculated over 3 seconds.
Speed alarms on MAIN screen
The instrument is programmed with low and high forward speed alarms.
MAIN_SEED_FERT.PCX
Display as figure 2 except as
shown
Display as figure 2 except as
shown
MAIN_LEFT_RIGHT.PCX
If the drill is in work and
the speed is less than 0.5
km/h then this section of
the MAIN display will
flash the following
warning and the audible
alarm will beep. If the drill is in work and
the speed is above the
maximum that
proportional control can
achieve (indicated on the
RATE screen), then this
section of the MAIN
display will flash the
following warning and
the audible alarm will
beep.