Sumo DTS 3m, Руководство оператора и список запасных частей

Страница: 42 / 68

42
7.4 ORGA Metering Setup
Gears are interchangeable between the Motor Shaft and
Sumo ORGA shaft to achieve a wide range of seeding
rates. E.g 3:1 gearing can be swapped to achieve 1:3.
Each Metering Unit is supplied with a large and a small
gear.
Blanking slide for isolation of ORGA from tank contents.
Agitation unit has two positions, ‘in work’ (illustrated)
and ‘out of work’. These positions are secured with a
linch pin.
There are two internal inserts supplied with each Sumo
ORGA. A long insert is used to reduce (approximately
half) the seed rate for very low seed rates e.g. Oilseed
Rape, Grass or Linseed. The inserts also acts as a guide to
align the Sumo ORGA. The Short Insert has no effect on
seed rates and purely supports the end of the orga
flighting..
Short Insert
Large Insert