1. Turn handle on winch clockwise to elevate.
2. Never allow lift cable loop,
Counter Weight, or line
shackle to contact “Tee
Head” while elevating mast.
Continued cranking in this
condition will cause “Tee
Head” to bend.
4. Attaching Lift Cable to Object
1. Lower lift line to load by rotating the winch
handles counter clockwise.
2. Lower the hook until the cable is long
enough to securely attach to the load.
Note:
Secure load line using approved rigging
practices and equipment only.
WARNING
Always lift load slightly to check rig-
ging and balance before elevating.
5. Elevating Load
1. Raise the load by turning the winch handles
in a clockwise direction.
WARNING
Never allow anyone under an
elevated load.
6. Lowering Load
1. Lower the load by turning the winch handles
in a counterclockwise direction.
7. Removing Mast
Note:
Caster brakes should always be locked
when removing mast.
1. Place
crowbar
under pry tab
and raise mast
from base un-
til the locating
ring rests on
top of the
base.
2. Remove
mast
from the base.
Pry tab
8. Caster Brakes
1. Set brake by pressing down on brake lever
as shown.
2. Release brake by lifting up on brake lever.
