Sumner Beam Jax, Руководство по безопасности оператора

Страница: 10 / 20

10 Max Jax / Beam Jax Operator's Manual
Instructions for Moving Load
Max Jax
A. ALWAYS be certain Beam Jax or Max Jax stands are of a similar
height before loading.
ALWAYS be certain to place stands close enough together to fit under
the length of the load.
ALWAYS use at least 2 Beam Jax or Max Jax to handle loads. NEV-
ER use a single Beam Jax or Max Jax stand alone to prop up loads.
ALWAYS place loads carefully on Beam Jax or Max Jax. NEVER drop
loads onto Beam Jax or Max Jax stands.
ALWAYS use Beam Jax and Max Jax stands on a firm, level surface
such as pavement or hard flooring. NEVER use Beam Jax and Max
Jax stands on dirt or gravel surfaces.
ALWAYS inspect Beam Jax and Max Jax stands thoroughly before
using for evidence of structural or caster damage including damaged
or bent legs, cracked welds, and cracked, bent or broken casters.
NEVER use a stand that shows signs of structural or caster damage.
IMPORTANT
For more information on general safety
practices and commonly found issues see
Sumner's Pipe Jack Safety Manual.
NEVER lock casters while loading stands.
NEVER load more than one beam or pipe on stands.