Summit SCR611GLOS, Инструкция по эксплуатации

Страница: 9 / 16

9
in functional (default) mode, the lightswill turn on only when the door is open. If you are in
showcasemode, the lights will be on whether or not the door is open.
ºF/ºCSelector
Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the
LIGHT key for 5 seconds.
Setting the Temperature Control

You can set the temperature by touching the UP and DOWN symbols. When you push either of
the two buttons for the first time, the LED readout will show the original temperature set
previously. (The temperature preset at the factory is 38°F/3°C).

The temperature you are setting will increase byone degreeeach time you touch the UP symbol,
and will decrease byone degreeeach time you touch the DOWN symbol.

The range of the temperature control is from 36°F to 43°F.

To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
SABBATH MODE
Sabbath mode is available for the observance of certainreligious holidays. This mode turns off the
displays, interior lightand audible alarms and prevents them fromturning on again. Normal cooling
operations will still takeplace.
To initiate Sabbath mode, press the
POWER and LIGHT keys at the same time for at least 5 seconds. The
indicator light (The dot at the bottom right of the display) will flash four times and confirm the Sabbath
mode is ON.
Sabbath mode can be canceled by repeating the above process. The Sabbath Mode will automatically
cancel after96 hours.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.) , the unit can remember the
previous temperature settings. When power is recovered, the cabinet will return to the same set
temperature as before the power went off.
TEMPERATURE ALARM / DOOR ALARM

An audible alarm sounds if the storage temperature is not coldenough.The temperature display
flashes at the same time.

The cause of the temperature being too high may be:
-
Warm items were placed inside
NOTE:

If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, theunit will not start.

When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.