1.
Position the Gun Rest Mounting Bracket as shown in
figure 1
. The bracket MUST be placed at least 3” up the arm to provide clearance for
the platform when the stand is packed together. The long side of the bracket should be on the outside of the stand.
2.
Secure the bracket using one 1 3/4” bolt and lock nut. The bolt MUST run from the outside in as shown in
figure 2 (bolt is in yellow)
. Repeat for the other side.
3.
From the inside, position the 2 1/2” carriage bolt (shown in blue) inside the bracket. Over this bolt, slide one Gun Rest Adjustment Bracket,
one Neoprene Washer (red), one more Gun Rest Adjustment Bracket and then the Gun Rest Bar (bright green). See
figure 2
.
4.
Secure the bar with the supplied knob.
5.
At the other bracket location, combine one Adjustment Bracket, a Neoprene washer and the last Adjustment Bracket. Slide this assembly
between the Gun Rest tube and the Mounting Bracket lining up the bolt hole. Insert the carriage bolt through the entire assembly from the
inside out. Secure with the knob.
6.
Position the 16” Arm pad on the gun rest bar as shown in
figure 3
. Place the pad around the bar and use the zipper to secure.
1 3/4” BOLT, LOCK NUT
- WRENCH TIGHTEN
MOUNTING
BRACKET
(PN 20431)
1
16” FOAM PAD
(PN 70224)
3
WARNING
!
Never sit on this gun rest or attempt to use it as a climbing aid!
21071 - GUN REST HARDWARE PACKET
PN DESCRIPTION
QTY
10632
2 1/2” CARRIAGE BOLT, 1/4x20
2
10601
1 3/4” BOLT, 1/4x20
2
10612
LOCK NUT, 1/4x20
2
10633
NEOPRENE WASHER
2
10544
GUN REST ADJUSTMENT BRACKET
4
10660 KNOB
2
20431
GUN REST MOUNTING BRACKET
2
10544
20431
10660
BOX CONTENTS
PN DESCRIPTION
QTY
GUN REST TUBE
1
70224
16” CAMO ARM PAD
1
21071
GUN REST HARDWARE KIT
1
GUN REST
BAR
(PN 40104)
KNOB
(PN 10660)
ADJUSTMENT
BRACKET
(PN 10544)
NEOPRENE
WASHER
(PN 10633)
ADJUSTMENT
BRACKET
(PN 10544)
2
FORM# 10892-14, 2/2014
Adjustable Gun Rest
© 2014 Summit Treestands, LLC
715A Summit Dr. Decatur, AL 35601
(256) 353-0634
[email protected]
www.summitstands.com
PN 85251, 85252
PARTS LIST
1
ASSEMBLY
2
