background image

2

4) Retain all paperwork pertaining to the purchase of your Thorley product. Save your receipt!

Your limited warranty is not valid without a receipt of purchase.

The installation of headers onto any vehicle must be performed in accordance with all govern-
mental regulations that might pertain to the particular vehicle receiving the headers. Please
call your Doug Thorley Headers distributor if there are any questions regarding the legality of
the installation. 

The Executive Order (“E.O.”) number for this part number is “PENDING”.

WARRANTY NOTES

1) It is important that you read the entire instruction sheet before initiating any installation.

2) Thorley headers are designed to fit only factory installed engine and transmission combi-

nations. We cannot guarantee that Thorley headers will fit in the case of “engine swaps” or
“transmission swaps”.

3) Due to restricted room in the engine compartment, your headers may come close to cer-

tain body and chassis components. This is normal for an installation of this type. However,
a careful inspection must be completed to insure that the distances and placement are
reasonable and logical, especially with regard to electrical, fuel, and brake components.

4) Because of the requirement to raise the engine to facilitate header installation, the engine

mounts should be carefully inspected at that point of the installation. It is highly recom-
mended that questionable or deteriorated engine mounts be replaced during the
installation of the headers. In some cases, the engine mounts need to be loosened and
repositioned to provide optimum header clearance from some components.

5) Because of car-to-car variations, 

Thorley Headers strongly recommends that these 

headers be installed by a competent exhaust shop that has welding and fabrication 
capabilities.  

INSTALLATION NOTES

LEGALITY NOTE

THY-470

NISSAN/ SUZUKI 4.0L

FRONTIER, PATHFINDER, XTERRA/

EQUATOR, 2005-12, 2/4WD

Содержание Doug Thorley Headers THY-470

Страница 1: ...s is a heat chrome to preserve the metal This finish is not show chrome intended for the sake of appearance This high nickel chrome turns colors and approaches black as it cooks into the metal The brilliance of the chrome finish is not cov ered under the warranty Contamination of the surface by foreign substances may produce other color patterns This can be prevented by routine cleaning B Y S U M ...

Страница 2: ... restricted room in the engine compartment your headers may come close to cer tain body and chassis components This is normal for an installation of this type However a careful inspection must be completed to insure that the distances and placement are reasonable and logical especially with regard to electrical fuel and brake components 4 Because of the requirement to raise the engine to facilitat...

Страница 3: ... support it with jack stands or other suitable supports WARNING Do not rely on bumper jacks or chassis jacks for support during header installation The subject vehicle should be raised and supported with jacking equipment and jackstands or ramps intended for undercarriage auto maintenance It is extremely dangerous to work under an improperly raised and or supported vehicle 3 Disconnect the O2 sens...

Страница 4: ...lied M10 1 25x35mm bolt and M10 1 25 nut along with the two factory nuts Leave the connection loose at this time 12 Once you are satisfied with the alignment of all the components you may begin tightening everything down starting at the header first Tighten down the header nuts starting in the middle working your way outward 13 Then tighten the connections at the catalytic converter pipes 14 Recon...

Отзывы: