S One
User’s Manual
Introduction
1-24
(Media must be loaded in the cutter before the knife pressure can be tested).
WARNING:
Each keystroke can initiate an internal test or movement of the head
or media. Keep fingers and other body parts away from the cutting area. There are
hazardous moving parts.
1.
Power on the cutter and load the media.
2.
Press pressure
3.
Press the arrow up or down
to change the value.
4.
Or fill in the new value
1.
Press
to perform the internal knife pressure test.
2.
Press
to confirm the chosen knife pressure.
3.
Press
to leave the pressure unchanged.
Once
is pressed, the current knife pressure value will be automatically set to the new
value and the cutter will cut the knife pressure test pattern.
FIG 1-17
1-17
KNIFE PRESSURE TEST PATTERN
S1D160
50000 x 145 mm
Knife
700 mm/s
90 g
Configuration 1
LAN 192.168.10.2
Knife pressure
1 2 3 0
4 5 6 .
7 8 9 C
90
85
g
Knife pressure
1 2 3 0
4 5 6 .
7 8 9 C
90
85
g
1.6.1.3
Setting knife depth and pressure:
