S One
User’s Manual
Setup
1-23
(Media must be loaded in the cutter before the knife pressure can be tested).
WARNING:
Each keystroke can initiate an internal test or movement of the head
or media. Keep fingers and other body parts away from the cutting area. There are
hazardous moving parts.
1.
Power on the cutter and load the media.
2.
Tap
.
3.
Use the arrows to change
the value...
4.
…o
r enter the new value
1.
Tap
to perform the internal knife pressure test.
2.
Tap
to confirm the chosen knife pressure.
3.
Tap
to leave the pressure unchanged.
Once
is tapped, the current knife pressure value will be automatically set to the new
value and the cutter will cut the knife pressure test pattern.
FIG 1-17
1-17
KNIFE PRESSURE TEST PATTERN
S1D160
50000 x 145 mm
Knife
700 mm/s
90 g
Configuration 1
LAN 192.168.10.2
Knife pressure
1 2 3 0
4 5 6
7 8 9 C
85
80
g
Knife pressure
1 2 3 0
4 5 6
7 8 9 C
85
80
g
50000 x 145 mm
Knife
700 mm/s
90 g
1.6.1.3
Setting knife depth and pressure:
Содержание S CLASS
Страница 1: ...User Manual Rev 003 ...
Страница 52: ......
