Sullivan-Palatek SP20 Скачать руководство пользователя страница 25

Страница: 25 / 117

COMPONENT DESCRIPTION

3.6.3 FLUID (OIL) COOLER

The fluid (oil) cooler is a two-pass, finned aluminum tube design. The fluid (oil) cooler allows transfer of

heat from the oil through the tube wall and into the fins. The heat is then removed by the airflow from the

electric-driven cooling fan. The cooling assembly is located over the drive motor and exhausts upward.

3.6.4 COOLING FAN AND MOTOR

The cooling fan and motor produce airflow through the fluid/air cooler to remove heat. The cooling fan is

an air-foil design which reduces fan noise compared to standard blade design. The fan is attached to the

motor shaft and located within the venturi. The motor is mounted to its support which properly locates the

assembly centered in the venturi.

3.6.5 FLUID (OIL) FILTER

The fluid (oil) filter removes particulate from the oil prior to entering the compressor unit. The fluid (oil) filter

is a dual full-flow, spin-on type element made of microglass media. It is mounted with the elements on top

so that any remaining fluid drains out at time of maintenance.

3.7

AIR INLET AND CAPACITY CONTROL SYSTEM

NTS

DATE

KEY

VORTEX CONTROL VALVE

VORTEX PRESSURE REGULATOR

PRESSURE REGULATING CONTROL VALVE

BLOWDOWN SOLENOID VALVE

INLET CONTROL VALVE

INLET AIR FILTER

FIRST USED ON:

3RD ANGLE

PROJECTION

SHEET

SCALE:

TOLERANCES AS FOLLOWS:

REV

DESCRIPTION

THIS DRAWING AND ALL INFORMATION THEREIN IS THE PROPERTY OF SULLIVAN-PALATEK, INC. IS CONFIDENTIAL AND MUST NOT BE MADE PUBLIC OR COPIED.

WWW.SULLIVANPALATEK.COM

SULLIVAN-PALATEK

CHECKED BY:

DATE:

DRAWN BY:

ANGLES: + OR - 1/2 DEG.

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE NOTED

X.XXX + OR - 0.005

X.XX + OR - 0.020

DECIMAL: X.X + OR - 0.050

MATERIAL:

IT IS LOANED SUBJECT TO RETURN UPON DEMAND, IS NOT TO BE USED DIRECTLY OR INDIRECTLY IN ANYWAY DETRIMENTAL TO SULLIVAN-PALATEK'S INTEREST.

DRAWING NO:

SIZE

CONTROL SYSTEM

FIGURE 3-2.

SP20-MPC CONTROL SYSTEM (LEGEND)

COMPONENT

Vortex Control Valve

Vortex Pressure Regulator

Line Pressure Transducer (P2)

Pressure Regulating Control Valve

Line Pressure Transducer (P1)

blow-Down Solenoid Valve

Inlet Control Valve

Inlet Air Filter

The air inlet and capacity control system utilizes electrical and pneumatic components to ensure the

compressor effectively produces compressed air to meet the demand of the customer’s process. This

control system is comprised of the inlet valve, control regulating valve, blow-down solenoid valve and line

pressure transducer

. Depending on air demand from the customer’s process, these control components

will cycle the compressor between five modes: start-up, full-load, modulation, unload and shutdown.

Содержание SP20






















































































































Результаты поиска

Содержание SP20

Отзывы:

Похожие инструкции для SP20

Бренды по названию

Популярные бренды

Sullivan-Palatek SP20, Руководство пользователя

Результаты поиска

Содержание SP20

Отзывы:

Похожие инструкции для SP20

Бренды по названию

Популярные бренды