Sullivan-Palatek 125G, Руководство по эксплуатации и каталог запасных частей

Страница: 5 / 66

SULLIVAN-PALATEK______________________________
5
Do not use air pressure greater than 30 PSI (207 kPa) for blow-off or cleaning purposes,
and then only with effective chip guarding and personal protective equipment as required
by OSHA.
Compressed air filters or lubricators with plastic bowls may be affected by lubricant and
should not be used. Steel bowls are recommended.
Keep personnel out of line with, and away from, the discharge opening of airlines, or
tools, or other areas of direct, or deflected, compressed air discharge.
Do not allow anyone to engage in horseplay with air hoses, as serious bodily injury or
death may result.
Do not substitute bolts with material or marking different from original equipment.
Do not over-tighten any bolt, nut, fitting, connection, or spin-off filter element.
1.3 FIRES/EXPLOSIONS
Clean up any spilled oil or oil leakage, and repair oil leaks as soon as they are
discovered.
Do not allow oil to accumulate on, in, or around acoustic noise material. Immediately
replace any oil-soaked material after cleaning enclosure surface with nonflammable
solvent.
Do not operate compressor when there is a possibility of its ingesting flammable, toxic or
explosive fumes, mists or particles.
Do not operate compressor with the temperature sensor inoperative or any of its two
Pressure Switches inoperative or incorrectly connected.
Keep conductive objects away from exposed live electrical parts, such as terminals, to
avoid sparks that may serve as a source of ignition.
Replace the air/oil separator element only with factory original equipment replacement
parts to be certain that anti-static provisions are present.
Ground the machine in accordance with National Electrical Code (NEC) requirements.
Do not use plastic pipe for compressed air.
1.4 MOVING PARTS
WARNING: Do not operate the compressor with its Fan Guard removed.
Keep clothing, hands, arms, and other parts of the body, away from the fan and drive
coupling.
Wear snug-fitting protective clothing (no neckties) and confine long hair when working
around compressor.