www.suck.uk.com
Wooden LED Alarm Clock
1.
Alarm On Sign
2.
HOUR set button
3.
MINUTE set button
4.
TIME set button
5.
ALARM set button
6.
ALARM ON/OFF switch
7.
Adaptor port
To Operate Clock
Blinking Display/Alarm On Indicator
When the clock is plugged in the display will blink on and off meaning the incorrect time is being displayed.
You should always check the time when this is indicated.
When the ALARM ON sign (1) is on, the alarm will sound at the time set.
Set time
Press and hold Time button (4) and Hour button (2) until the correct hour is displayed, then release the Hour button (2)
and press the Minute button (3) until the correct minute is displayed.
Set Alarm
Press and hold Alarm button (5) and Hour button (2) or Minute button (3) as above.
lf you press Alarm, Hour and minute 3 button together, the alarm time will reset to 12:00 Am / 0:00.
To Operate Alarm
Push ALARM ON/OFF switch (6) to ON position, the alarm will sound at the time set. To shut off the alarm, push ALARM
ON/OFF switch (6) to OFF position.
When alarm sound, press Alarm button to stop alarm sound, it will sound again on next day.
Maintenance
A soft cloth or a paper towel can be used to clean your clock. Do not use any corrosive cleanser or chemical solutions on
the clock. Keep the clock clean and dry to avoid any problems.
Safety Instructions
•
The apparatus shall not be exposed to dripping or splashing. No object filled with liquids, such as vases, shall be
placed on the apparatus.
•
Ventilation-The appliance should be situated so that its location or position does not interfere with its proper
ventilation. For example, the apparatus should not be placed on a bed, sofa, rug, or similar surface that may block
the ventilation openings, or placed in a built-in installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
•
The appliance should be situated away from heat sources such as radiators, heat registers, stoves or other
appliance (including amplifiers) that produce heat.
•
Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed up or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
•
Disconnect from mains supply when not in use.
•
To avoid the risk of electric shock, do not remove the cover of the apparatus.
•
There are no user serviceable parts inside. Do not operate this product if the mains lead is damaged. The mains
lead must be replaced by the manufacturer or its appointed agent.
•
Please read the instruction manual before use and retain for future reference. The rating label is on the unit’s
bottom.
•
During electro static discharge, the product may auto reset then press function key to return normal operation.
