4
R
ESET
B
UTTON
A multifunctional reset button is provided. Use a pointed object such as toothpick or paper clip
(straightened) to press the reset button.
Continuous
Seconds
Action
1
Save the running configuration to the USB device named "running-config".
4
Reboot the system.
More than 7
Reset the system to factory default and reboot it.
USB
P
ORT
A USB port is available on the switch that is located between the Console port
and Reset button. This USB port provides the following features:
▪
Backup/Restore Configurations
▪
Auto-Load configuration from USB
▪
Auto-Backup configuration to USB
▪
Save system logs to USB
E
ARTH
G
ROUNDING
The earth grounding and cautious wire routing are helpful to suppress the effects of noise from
electromagnetic interference (EMI). The switch has to be installed on a well-grounded surface, for
instance, a metal panel.
The location of earth ground screw is usually near the location of power
inputs, for example:
▪
Top side for most of din-rail models
▪
Rear side for most of rack-mount models
▪
Front side for most of M12 models
Note:
Connect the ground from the ground screw to the surface of ground before wiring the
power inputs.
