Black plate (141,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
&
Switch location
Left-hand drive models
Right-hand drive models
1)
Operation indicator
2)
Push-button ignition switch
&
Switching power status
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver
’
s seat.
2. Shift the shift lever in neutral (MT
models) or the select lever in the
“
P
”
position (CVT models).
3. Press the push-button ignition switch
without depressing the clutch pedal (MT
models) or the brake pedal (CVT models).
Every time the button is pressed, the
power is switched in the sequence of
“
OFF
”
,
“
ACC
”
,
“
ON
”
and
“
OFF
”
. The
operation indicator on the push-button
ignition switch illuminates or turns off as
shown in the following chart.
Power
status
Indicator color
Operation
OFF
Turned off
Power is turned off.
ACC
Orange
The following sys-
tems can be used:
audio and acces-
sory power outlet.
ON
Orange
(while engine is
stopped)
All electrical sys-
tems can be used.
Turned off
(while engine is
running)
CAUTION
.
When the push-button ignition
switch is left in
“
ON
”
or
“
ACC
”
for a long time, it may result in
vehicle battery discharge.
.
Do not spill drinks or other
liquids on the push-button igni-
tion switch. It may cause a mal-
function.
.
Do not touch the push-button
ignition switch with a hand soiled
with oil or other contaminants. It
may cause a malfunction.
.
If the push-button ignition switch
does not operate smoothly, stop
the operation. We recommend
that you contact a SUBARU deal-
er immediately.
.
If the push-button ignition switch
does not illuminate even when
the instrument panel illumination
is turned on, we recommend that
you have the vehicle inspected at
a SUBARU dealer.
.
If the vehicle was left in the hot
sun for a long time, the surface of
the push-button ignition switch
may get hot. Be careful not to
burn yourself.
Instruments and controls/Push
–
button ignition switch (models with push
–
button start system)
3-7
–
CONTINUED
–
3