Shift Boot （WRX RED）
（Ultrasuede ）
Installation Manual
Part Name
Shift Boot
1
No.
①
！
J1310VC624 Shift Boot （WRX RED）
WRX （2022MY〜）
Genuine Part Number ：
Applicable Vehicle Model ：
Component Part
Advice
For Installation Operator
Precautions
Installation completion drawing
Qty
1.For safety, stop the vehicle on a flat surface and turn off the engine and ensure that
the parking brake is applied before starting the installation process.
2.Since connectors have to be detached and attached during the installation process, make
sure to disconnect the power cord of battery (-) negative side before handling electrical components.
Follow the instructions of the latest service manual for the removal and installation of the (-)
negative side cord.
3.When installing this part, be careful enough not to scratch the vehicle or parts with tools.
4.Follow the instructions marked with in the "Installation Procedure" from the next
section onward.
The things that should be followed and useful to know for this product, are marked with
in this manual.
This manual describes how to install and handle the Shift Boot.
Before installation, please read this manual for proper installation.
After installation, be sure to hand this manual to the customer.
Caution
Advice
１
△00
Ultrasuede is a registered trademark of Toray Industries, Inc.
Manufacturer
CORPORATION
① Shift Boot
