Subaru Solterra 2023, Руководство по началу работы

Страница: 120 / 148

MEMORY DRIVER’S SEAT (if equipped)
You can set the driver’s seat and
outside mirror position and
retrieve them using the buttons on
the driver’s door or the access
key fob:
To set a seat position with a
button:
1. Check that the shift position is
in P.
2. Turn the power switch to ON.
3. Adjust the driver’s seat and
outside mirrors to your desired
positions.
4. While pressing the “SET” button, or within 3 seconds after the “SET” button is pressed,
press and hold button “1” or “2” until the buzzer sounds.
To retrieve the seat position set with a button:
1. Check that the shift position is in P.
2. Turn the power switch to ON.
3. Press and hold either the “1” or “2” button until a buzzer sounds. The seat and outside
mirrors are automatically recalled to your preferred positions.
To set a seat position with the access key fob:
In order to register the seat/mirror positions to the access key fob, first register the position
to either button “1” or “2” using the preceding procedure. Carry only the access key fob
you want to register with you to your Solterra (if both key fobs are in the vehicle, the
position cannot be registered correctly).
1. Check that the shift position is in P.
2. Turn the power switch to ON.
3. Recall the position you want to record using the “1” button or “2” button.
4. While pressing either the “1” or “2” button, press and hold the door lock switch on the
driver’s door until a buzzer sounds.
To retrieve the seat position set with the access key fob:
1. Hold the access key fob.
2. Unlock and open the driver’s door. The seat and outside mirrors are automatically
recalled to your preferred positions.
Memory Seat Buttons
HOW TO APPENDIX
118