Subaru Solterra 2023, Руководство по началу работы

Страница: 109 / 148

AUTOMATIC HIGH BEAM (AHB)
This function uses the SUBARU
Safety Sense camera to
automatically switch the
headlights between high and low
beam settings, enhancing safety
for both you and other drivers on
the road. To activate Automatic
High Beam, press the Automatic
High Beam switch in the lower left
instrument panel and set the
headlight control switch to the
“AUTO” or headlight low beams
position. The AHB indicator
illuminates in the Combination
Meter.
AHB automatically activates the high beams when the forward area
is dark, there are no preceding/oncoming vehicles with lights on,
and your speed is approximately 21 mph or more. When a
preceding/oncoming vehicle with lights on is detected, the forward
area is bright, or your speed decreases below approximately 17 mph, AHB automatically
switches to low beams.
PARK ASSIST (if equipped)
The Park Assist function helps
guide you into your spot, avoiding
dents and dings. The distance
from your vehicle to objects, such
as a wall, when parallel parking or
maneuvering into a garage is
measured by the sensors and
communicated via the multimedia
display and a buzzer. Always
check the surrounding area when
using this system.
When the sensors detect an object, such as a wall, a graphic is shown on the multimedia
display depending on the position and distance to the object (as the distance to the object
becomes short, the distance segments may blink.) For models with advanced park, the
object warning function also informs you of objects along the side of the vehicle, using the
display and buzzer, if the objects are within the estimated path of the vehicle.
Use the meter control switches to enable/disable Park Assist in the Multi-information
Display. The function can be used when the power switch is on, vehicle speed is less than
about 6 mph, and a shift position other than P is selected.
DRIVER ASSIST TECHNOLOGIES
107