Subaru Legacy Outback 2008, Руководство пользователя

Страница: 32 / 471

Black plate (33,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
RHD model
1. Press the desired button
“
1
”
or
“
2
”
.
2. The chirp sounds once and the seat
moves to the registered position.
3. When the seat moves to the registered
position, the chirp sounds twice.
WARNING
.
Be sure to press the registered
button of your seat position to
retrieve the seat position. If the
seat position is not the optimum,
an incorrect driving position dis-
turbs driving and also the seat-
belt does not function correctly,
which could result in serious
injury or death.
.
To retrieve the seat position,
make sure the hands, feet or
luggage of rear seat passengers
are clear of the seat adjusting
mechanism.
NOTE
.
If a new position is registered for the
same button, the previous seat posi-
tion is deleted.
.
If the battery is removed, the regis-
tered seat position is not deleted.
&
Head restraint adjustment
To raise the head restraint, pull it up.
To lower it, push the head restraint down
while pressing the release button on the
top of the seatback.
The head restraint should be adjusted so
that the center of the head restraint is
closest to the top of the occupant
’
s ears.
WARNING
Never drive the vehicle with the
head restraints removed because
they are designed to reduce the risk
of serious neck injury in the event
that the vehicle is struck from the
rear.
NOTE (OUTBACK models only)
If the seatback is reclined rearward to
the same level as the rear seat cushion
with the head restraint removed, a wide
flat bed is made available.
Seat, seatbelt and SRS airbags
1-7
–
CONTINUED
–
1