Subaru Legacy Outback 2008, Руководство пользователя

Страница: 177 / 471

Black plate (180,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
3-50
Instruments and controls
Light control switch
The light switch operates only when the
ignition switch is in the
“
ON
”
position.
WARNING
To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the
“
ON
”
position. In any other
position, the vehicle
’
s lights will be
out.
If you park your vehicle on a road-
side at night, use the hazard warn-
ing flasher to alert the other drivers.
&
Headlights
To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position
Front position lights, instrument panel
illumination, tail lights and license plate
light are on.
second position
Headlights, front position lights, instru-
ment panel illumination, tail lights, and
license plate light are on.
&
High/low beam change (dim-
mer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light
“ ”
on the instru-
ment panel is also on.
To switch back to low beam, pull the lever
back to the detent position.