Subaru Legacy Outback 2008, Руководство пользователя

Страница: 132 / 471

Black plate (135,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
Push-button ignition switch
(vehicle with push-button
start system)
1) Push-button ignition switch
2) Operation indicator
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver
’
s seat.
2. Make sure that the shift lever is in
neutral (MT vehicles). Make sure that the
selector lever is in the
“
P
”
position (AT
vehicles).
3. Press the push-button ignition switch
without depressing the clutch pedal (MT
vehicles) or the brake pedal (AT vehicles).
Every time the button is pressed, the
power is switched in the sequence of
“
OFF
”
,
“
Acc
”
,
“
ON
”
and
“
OFF
”
. When the
engine is stopped and the push-button
ignition switch is in
“
Acc
”
or
“
ON
”
, the
operation indicator on the push-button
ignition switch illuminates in orange.
Power
status
Indicator color Operation
OFF Turned off Power is turned off.
Acc Orange
The following parts
can be used:
wipers, washer,
audio and acces-
sory power outlet.
ON
Orange (while
engine is
stopped)
All electrical parts
can be used.
Turned off
(while engine
is running)
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, stay at
least 22 cm (8.7 in) away from the
transmitting antennas installed on
the vehicle.
The radio waves from the transmit-
ting antennas on the vehicle could
adversely affect the operation of
implanted pacemakers and im-
planted defibrillators.
If you wear electric medical equip-
ment other than an implanted pace-
maker or an implanted defibrillator,
before using the push-button start
system, refer to
“
Radio waves are
used for push-button start system
”
mentioned later, and contact the
electric medical equipment manu-
facturer for more information. The
radio waves from the transmitting
antennas on the vehicle could ad-
versely affect the operation of the
electric medical equipment.
.
The operational/non-operational
setting for the keyless access
functions can be changed. For
the setting procedure, refer to the
“
Disabling keyless access func-
tions
”
section in chapter 2. The
setting can also be changed by a
SUBARU dealer. For more de-
tails, we recommend that you
contact a SUBARU dealer.
.
For detailed information about
the operation method of the
push-button ignition switch while
the keyless access functions is
switched to the non-operational
mode, refer to the
“
When access
key does not operate properly
”
Instruments and controls
3-5
–
CONTINUED
–
3