REAR STEP GUARD
（REAR DOOR SILL STEP GUARD）
Step guard RH
Step guard LH
Installation Manual
１
△00
J1010AN400
OUTBACK （2020MY ～）
Revised contents
△
Details of the work
00
date
2022/7/29
Please make sure to read this manual before installing the step guard to ensure proper
installation. If you do not follow the precautions, then the car may be damaged or the
product may peel off or tear, resulting in a serious accident.
Request
Newly created document
Precautions for installation
Components
Part Description
Ｎｏ．
Quantity
1
1
①
②
（Be sure to check the components before starting work）
Tools
①
②
Distributor
Co., Ltd.
Genuine Part Number：
Applicable Model：
1. Carry out the installation work in a large open area free from obstructions to ensure
safety.
2. Turn OFF the engine and securely apply the parking brake before carrying out the work.
3. Pooling of cleaning agent may deteriorate car parts. Soak a soft cloth with a cleaning
agent and carefully wipe the areas that need cleaning so as to prevent dripping, and
then wipe them with a dry cloth.
4. When the air temperature is 15 C or lower, use a hair dryer to warm up（to
approximately 30 to 50 C）the double-sided tape on the product and the car surface to
which the product is to be attached. Do not use an industrial dryer.
5. In order to pressure bond the double-sided tape, apply weight to the product （use the
palm of your hand to apply a force of 50 N or higher）.
6. Do not apply a load to the product for 24 hours after the installation.
7. When blowing air on the product after the installation, maintain a distance of at least
300 mm between the exhaust port of the blower and the product.
8. Reattaching the product reduces the adhesive strength of the tape. Carry out the work
with care to prevent the need for reattachment work. Do not reuse the product once it
has been peeled off.
Soft lint-free cloth ／70% Isopropyl alcohol／Masking tape
