Subaru Impreza 2016, Руководство пользователя

Страница: 115 / 600

Black plate (117,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
&
Registering a PIN code
!
Preparation
1. Turn off the ignition switch.
2. Close all doors (including trunk/rear
gate).
3. Press and hold the
“ ”
button on the
access key. Then all doors (including rear
gate) will be locked.
4. Keep the
“ ”
button pressed, and
press the following button within 5 sec-
onds after step 3.
.
4-door: the trunk opener button
.
5-door: the rear lock button
5. Press and hold the above button for
more than 5 seconds. Then a chirp will
sound.
6. Release the
“ ”
button and trunk
opener button/rear lock button.
7. Press the
“ ”
button on the access key
while the chirp sounds.
Then the chirp will stop and the prepara-
tion is complete.
NOTE
If you do not press the
“ ”
button on
the access key, the chirp will sound for
30 seconds. In this case, the prepara-
tion for registering a PIN code does not
complete even if the chirp stops.
!
Registration
For example, to register
“
32468
”
as the
PIN code, perform the following proce-
dure.
4-door:
1. Press the trunk opener button three
times.
2. After a buzzer (ding) sounds once,
press the trunk opener button twice.
3. After a buzzer (ding) sounds once,
press the trunk opener button four times.
4. After a buzzer (ding) sounds once,
press the trunk opener button six times.
5. After a buzzer (ding) sounds once,
press the trunk opener button eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the buz-
zer starts sounding intermittently.
7. All doors will be unlocked and locked.
Then the PIN code will be registered.
5-door:
1. Press the rear lock button three times.
2. After a buzzer (ding) sounds once,
press the rear lock button twice.
3. After a buzzer (ding) sounds once,
press the rear lock button four times.
4. After a buzzer (ding) sounds once,
press the rear lock button six times.
5. After a buzzer (ding) sounds once,
press the rear lock button eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the buz-
zer starts sounding intermittently.
7. All doors (including rear gate) will be
unlocked and locked. Then the PIN code
will be registered.
NOTE
.
Press the trunk opener button/rear
lock button ten times to enter
“
0
”
.
.
Change the PIN code frequently to
protect your vehicle from theft.
.
If you have lent your vehicle to
another person, confirm that the PIN
code has not been changed or deleted.
If the PIN code has been changed or
deleted, reregister a new PIN code.
.
If you make an error during the
registration procedure, press the
“ ”
or
“ ”
button on the access key.
Then, start over from the procedure
described in
“
Preparation
”
.
.
To protect your vehicle from theft,
you cannot register a string of the
same five numbers together, such as
“
00000
”
, nor
“
12345
”
as a PIN code.
.
Do not register your vehicle license
plate number or simple numbers such
as
“
11122
”
or
“
12121
”
as a PIN code.
Doing so will increase the risk of
vehicle theft.
.
When you try to register
“
22222
”
,
Keys and doors/PIN Code Access (models with
“
keyless access with push
–
button start system
”
)
2-19
–
CONTINUED
–
2