Subaru Crosstrek Hybrid 2020, Быстрое руководство

Страница: 26 / 52

IGNITION SWITCH
Pressing the ignition switch once with your foot off the brake will place the ignition in
“ACC” (accessory) mode. You will be able to use the radio and accessory power outlets.
Pressing the ignition switch twice with your foot off the brake will place the ignition in
“ON”. All electrical systems will be available.
STARTING THE ENGINE
With Push-button Ignition
To start the hybrid system:
1. Make sure the charge cable is disconnected.
2. Sit in the driver’s seat with the access key fob.
3. Make sure the select lever is in “P”.
4. Depress the brake pedal until the indicator on the ignition switch turns green.
5. While depressing the brake pedal, briefly press and release the ignition switch.
6. Check that the hybrid “READY” indicator light is illuminated in the Combination Meter
Display (CMD).
NOTE: Based on the high-voltage battery state of charge or other environmental
conditions, the gasoline engine may not start.
Sights
The hybrid “READY” indicator light in the Combination Meter Display (CMD) indicates the
vehicle is ready for driving. You may not be able to hear any sound coming from the
vehicle.
Sounds
You may hear a humming sound from the front
of the vehicle when you move the select lever
to the “R”, “D”, or “B” position, or the gasoline
engine may start.
OPERATING THE VEHICLE
24