Subaru 2013 Forester, Руководство пользователя

Страница: 455 / 529

Black plate (461,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
Brake booster
If the brake booster does not operate as
described in the following, we recommend
that you have it checked by your SUBARU
dealer.
1. With the engine off, depress the brake
pedal several times, applying the same
pedal force each time. The distance the
pedal travels should not vary.
2. With the brake pedal depressed, start
the engine. The pedal should move
slightly down to the floor.
3. With the brake pedal depressed, stop
the engine and keep the pedal depressed
for 30 seconds. The pedal height should
not change.
4. Start the engine again and run for
approximately 1 minute then turn it off.
Depress the brake pedal several times to
check the brake booster. The brake
booster operates properly if the pedal
stroke decreases with each depression.
Brake pedal
Check the brake pedal free play and
reserve distance according to the main-
tenance schedule.
&
Checking the brake pedal
free play
1) 0.5
–
2.0 mm (0.02
–
0.08 in)
Stop the engine and firmly depress the
brake pedal several times. Then, check
the amount of free play by pulling up the
brake pedal with a force of less than 10 N
(1 kgf, 2 lbf).
If the free play is not within proper
specification, we recommend that you
contact your SUBARU dealer.
&
Checking the brake pedal
reserve distance
1) Left-hand drive models:
More than 65 mm (2.56 in)
Right-hand drive models:
More than 85 mm (3.35 in)
Depress the pedal with a force of approxi-
mately 294 N (30 kgf, 66 lbf) and measure
the distance between the upper surface of
the pedal pad and the floor.
When the measurement is smaller than
the specification, or when the pedal does
not operate smoothly, we recommend that
you contact your SUBARU dealer.
Maintenance and service/Brake booster
11-29
11