Subaru 2011 Outback, Руководство пользователя

Страница: 157 / 495

Black plate (162,1)
一 般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
3-30
Instruments and controls
NOTE
.
Switch the push-button ignition
switch to
“
OFF
”
, and lock the doors.
When the push-button ignition switch
is in a position other than
“
OFF
”
, it is
not possible to lock the doors by the
door lock button or the
“ ”
button on
the access key.
.
When the access key is returned to
the inside of the vehicle or the push-
button ignition switch is switched to
“
OFF
”
, the chirp sound will stop.
.
This warning occurs when the push-
button ignition switch is in a position
other than
“
OFF
”
and the select lever is
in the
“
P
”
position (AT and CVT mod-
els).
!
Select lever position warning indica-
tion (AT and CVT models)
When the driver
’
s door is opened while
the push-button ignition switch is in a
position other than
“
OFF
”
and the select
lever is in a position other than the
“
P
”
position, the warning chime will sound.
NOTE
When a chirp sound is heard, shift the
select lever to the
“
P
”
position, switch
the push-button ignition switch to
“
OFF
”
, and get out of the vehicle.
!
Access key warning
When the vehicle is driven while the
access key is not inside the vehicle, a
chirp sound will be heard.
NOTE
Carry the access key, and drive the
vehicle.
!
Warnings by warning light
When the access key is not inside the
vehicle or is under such irregular condi-
tions, the access key warning light on the
combination meter flashes.
!
Access key warning for engine start
When the push-button ignition switch is
pressed while the access key is not inside
the vehicle, a chirp sound will be heard,
and the access key warning light will flash.
NOTE
.
Carry the access key, and press the
push-button ignition switch.
.
Even when the access key is within
the operating ranges inside the vehicle,
the access key warning may be pro-
vided depending on the status of the