manualshive.com logo in svg

Sub-Zero BI-36UG, Сборка, Страница: 1 / 45

Поделиться
Скачать
Sub-Zero BI-36UG Скачать руководство пользователя страница 1

Electronic Control System

3-2

#7019014 - Revision A - October, 2010

Built-In (BI) Series

Built-In (BI) Series

Term/Component

Definition / Description

Main Control Board ..………….… (Also referred to as the Main “Controller” Board), is the printed-circuit board (PC Board)

which contains a microprocessor, relays, triacs and electrical connections that monitor
and control all functions of the appliance.

Microprocessor ……….…….…... An electrical component on the control board which receives electrical signals from

other components, processes the information, then sends electrical signals to relays and
triacs on the board to open or close, switching components in the appliance ON or OFF. 

Relay ……………………….……. An electrical component on the control board which switches other components in the

appliance ON or OFF when instructed to do so by the microprocessor.

Triac ………………………....…… Similar in function to a relay, the triac is a three terminal semiconductor for controlling

current in either direction.

Control Panel Assembly ……..… (Also referred to as the User Interface Module, or User Interface), is that part of the

electronic control system where all manual input operations are performed.

Function Keys …….….................. The keys or buttons on the control panel assembly used for manual input operations.

The words on the function keys are: “LIGHTS”, “ICE MAKER”, “MAX ICE”, “PURE AIR”,
“COLDER”, “WARMER”, “ALARM” and “POWER”.

Capacitance Touch Sensitive ..… The ability of the keys on the control panel to detect the natural capacitance of the

human body when in close proximity causing a change in electrons state or quantity
which signals the electronic control to perform a function.

LCD (Liquid Crystal Display) …... A semi-liquid substance sandwiched between glass in the control panel assembly.  The

molecules of this semi-liquid substance have no specific orientation.  However, when
electricity is applied to them, they react predictably, aligning and straightening in such a
way as to control light passage.  In doing so, they can be manipulated and arranged to
form the indicators that appear in the LCD.

Indicators .....………………...…... The words, numbers and icons that appear at the LCD.

Fault Codes (Error Codes) ......... The code number indicators that may appear in the LCD when accessing Fault Code

History during Fault and Sensor Recall Mode.  This coded data represents current
and/or historical problematic events that specific electronic components may have expe-
rienced.

Temperature Units of Measure…. Temperature readings observed at the LCD may be in Fahrenheit units of measure (°F)

or Celsius units of measure (°C).  A series of key strokes allows the temperature units of
measure to be switched to display as either °F or °C.

Set-Point ……………………….... The desired zone temperature, established by pressing the COLDER or WARMER

keys.

High Offset (Cut-in) …………...... As the zone air temperature cycles up and down, the high offset is the maximum zone

temperature that the electronic control system will allow before calling for cooling.

Low Offset (Cut-out)…………...... As the zone air temperature cycles up and down, the low offset is the minimum zone air

temperature that the electronic control system will allow before interrupting cooling.

Thermistor …………………….….  (Also Referred to as a Temperature Sensor), is a resistor with which resistance changes

as the temperature around it changes.  For electronic control system purposes, the
microprocessor detects, monitors and processes this resistance value in order to control
the appliance’s cooling functions as well as displays it as a temperature reading in the
LCD.

Variable Speed Compressor …... A compressor designed to run at varying speeds depending on the temperature detect-

ed in the corresponding zone of the appliance.

Variable Speed Fan Motor ...…... A fan motor that is deigned to runs at varying speeds depending on the temperature

detected in the corresponding zone, or the temperature of a specific component.

ELECTRONIC CONTROL TERMINOLOGY & COMPONENT DESCRIPTIONS

The Built-In Series utilizes an electronic control system which monitors, regulates, controls and displays a variety of
functions and operations in the appliance.

The table below defines some of the basic electronic control system terminology.

Previous Page

Next Page

Main Menu

Built-In Series Menu

Built-In Series Menu

Previous Page

Main Menu

Table of Contents

Next Page

Содержание BI-36UG














































Отзывы:

Нет отзывов