manualshive.com logo in svg

Stylmark 630017, Инструкция по установке

Поделиться
Скачать
Stylmark 630017 Скачать руководство пользователя страница 1

Sheet# 971147 

Rev B (7/09) 

Stylmark, Incorporated 

 6536 Main Street NE, PO Box 32008 

Minneapolis, MN 55432 

1-800-328-2495 

www.stylmark.com

 

 

Figure 1 

Installation Instructions 

Wardrobe Doors 

Models: 630017, 630019, 

630021 & 630022 

 

INSTALLATION INSTRUCTIONS 

 

Before you begin 

These instructions illustrate the Stylmark® Wardrobe 
Doors for ¼” panels.  The maximum weight capacity of 

one door for this unit is 125 pounds.  If you have 
questions during assembly, call 800-328-2495 to request 

technical assistance.  This package does not include 
panels and mounting screws, which are necessary for 

complete assembly. 

Please read these instructions carefully before beginning installation. 

Tools you’ll need 

 

 

Rubber mallet  

 

Phillips screwdriver  

 

Drill with #29 bit 

 

Utility Knife 

 

Plumb bob 
 

 

Содержание 630017

Страница 1: ...ions illustrate the Stylmark Wardrobe Doors for panels The maximum weight capacity of one door for this unit is 125 pounds If you have questions during assembly call 800 328 2495 to request technical assistance This package does not include panels and mounting screws which are necessary for complete assembly Please read these instructions carefully before beginning installation Tools you ll need R...

Страница 2: ...to place using a rubber mallet Rails should fit snugly against the glazing vinyl See Figure 2 3 Position the stiles onto the sides of the panel so that the notched ends are at the bottom Tap the stiles into place using a rubber mallet Stiles should fit snugly against the glazing vinyl See Figure 3 Note Security doors must have the stiles orientated properly See Figure 6A 6B 4 Insert wheel assembli...

Страница 3: ...d frame at each corner using 8 32 x 2 1 4 screws part 213017 for models 630019 630022 or 8 32 x 1 9 16 part 213036 for models 630017 630021 Note Screws at the bottom must pass through the clearance hole in the wheel assembly Screws at the top must pass through the clearance hole in the plastic top guide See Figure 5 7 Press the adhesive bumpers onto the top and bottom of each stile covering the ex...

Страница 4: ...ck with the center of the header Mount the track part 130023 to the bottom of the door opening using 8 x 1 flat head screws part 212030 See Figure 7 Note It is not recommended that the track be installed over carpeting 3 Insert the rear door panel up into the header and lower bottom onto the track Adjust the door to align vertically with the side jambs by turning the adjusting screw in the wheel a...

Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды