6
Installation
Attaching The Leg
Attaching The Back
□
Place the seat frame (B) and arms (A
1
) and (A
2
) on a soft,
flat, non-abrasive surface.
□
Attach the left arm (A
1
) and right arm (A
2
) to the seat frame
(B) using the M6*35 hex bolts (AA) and M6 washers (BB).
NOTE
: Do not fully tighten the bolts, only hand tighten until
assembly is complete. Then fully tighten with the provided
wrench.
□
Attach the back (C) to the arms (A
1
) and (A
2
) using the
M6*35 hex bolts (AA) and M6 washers (BB).
□
Please ensure all the bolts are assembled correctly. Tighten
all the hex bolts (AA) with the wrench (DD). Attach the hex
bolt caps (CC).
A
1
CC
AA
BB
CC
AA
BB
B
A
2
A
1
A
2
C
