STW TC1, Руководство пользователя

Страница: 100 / 374

7 Teleservice Application Framework
User Manual 100/374
started!
sms_outfolder_path /usr/local/SMSOutFolder
Section: SMS outgoing folder
# Received SMS are stored in the GSM modem when received.
# Set the number of SMS slots that must be supervise through the daemon.
# Min. and default buffer size is 10, max. buffer size 0x7FFFFFFF, recommended max. is 10.
# If buffer size is less than 10, the default size will be set and an error message will be
put on stdout.
sms_recv_buffer_size 10
7.2.6 Network daemon
Daemon location Configuration file
/usr/local/bin/ynetworkd /etc/init.d/_ynetworkd.config
How to activate the configuration file of the network daemon:
Activate the configuration file of the network daemon, so the network daemon is started during the boot up
sequence automatically.
1. Rename the configuration file ynetworkd the following way:
# mv /etc/init.d/_ynetworkd.config /etc/init.d/ynetworkd.config
2. Reboot the system:
# reboot
ynetworkd
The ynetwork daemon provides functions to manage the internet connectivity automatically. Via D-Bus the
ynetworkd can be switched from "enabled connectivity" to "disabled connectivity". It is also possible to get the
actual connected interface.
To use the ynetworkd, it is necessary to configure the configuration file of the ynetworkd (ynetworkd.config).
This file configures the behavior of the network daemon, which is responsible for monitoring all network
interfaces, such as ETH, WLAN, and PPP (via BT or GSM). The daemon tries to connect to the internet,
depending on the priority of the interface. If it is possible to connect to a higher-prior interface, then the current
connection is cut and a connection to an interface with the higher priority is established.