STW TC1 Скачать руководство пользователя страница 103

Страница: 103 / 374

7 Teleservice Application Framework

User Manual

103/374

# If no path is set, default command "killall pppd" will be set and an error message will
be put to stdout.

# Daemon will not be started!

pppd_stop_script /etc/ppp/ppp-stop

# Mux_mode_enabled activates the usage of the gsmMuxd within the ynetworkd

# Per default the "use gsmMuxd modus" is deactivated and so the value is set to 0.

# In case of using the modem with the gsmMuxd, the mux mode has to be enabled (1).

# In that case one mux channel is used for data traffic

# and <gsm_tty_path> is used for sending AT commands to the modem.

# Every value greater than 1 will be automatically set to the default value (0)

mux_mode_enabled 0

# The virtual port of the GSM modem which is reserved for AT command communication.

# Max. path length 255

# If no path is set,the default path "/dev/mux1" will be used!

gsm_tty_path /dev/mux1

# In case the modem is no longer accessible there must be a way to reset the modem.

# Max. path length 255

# If no path is set, an error message will be put on stdout. Daemon will not be started!

modem_restart_script /etc/init.d/scripts/gsm restart

# Time which the ynetworkd waits before it verifies the connection.

# Note: Time will be doubled internally

# Min. search time and default is 5, max. search time 0xFFFFs

# If search time is less than 5, default search time will be set.

ppp_net_search_time 10

# After trying NO_NETWORK_REG_COUNTER times, the GSM modem will restart.

# Min. number of tries and default is 3, max. number of tries is 0xFFFF

# If the tries number is less than 3, default tries number will be set.

NO_NETWORK_REG_COUNTER 3

Section: WLAN settings

# To start and stop connections via WLAN, the ynetworkd uses standard linux tools.

# Set the scripts that have to run to establish and to finish a connection via WLAN.

# Start WLAN connection, i.e. scan for hosts and clients

# Max. path length 255

# If no path is set, an error message will be put on stdout. Daemon will not be started!

wlan_start_script /etc/init.d/scripts/wlan_daemon

# Connect to a host or client

# Max. path length 255

# If no path is set, an error message will be put on stdout. Daemon will not be started!

wlan_connect_script /etc/init.d/scripts/wlan_daemon

# Disconnect WLAN connection from host or client

# Max. path length 255

# If no path is set, an error message will be put on stdout. Daemon will not be started!

wlan_disconnect_script /etc/init.d/scripts/wlan_daemon

# Time that the ynetworkd waits before it verifies the connection.

# Note: Time will be doubled internally.

# Min. search time and default is 5s, max. search time 0xFFFFs

# If search time is less than 5s, default will be set.

wlan_net_search_time 5

# WLAN tx power:

# 1: 10 dBm --> 10 mW

# 2: 15 dBm --> 31 mW

# 3: 20 dBM --> 100 mW

# >3 and default is 15 dBm

wlan_tx_power 2

Содержание TC1























































































































































































































































































































































































Результаты поиска

Содержание TC1

Отзывы:

Похожие инструкции для TC1

Бренды по названию

Популярные бренды

STW TC1, Руководство пользователя

Результаты поиска

Содержание TC1

Отзывы:

Похожие инструкции для TC1

Бренды по названию

Популярные бренды