24
COMPRESSOR
THRES:
Threshold level. [0dB - -50dB]
RATIO
:
Ratio of compression. [1:1 – 10:1]
ATTACK
:
Attack time compression level. [1ms - 200ms]
RELEASE
:
Release time compression level. [20ms - 1000ms]
GAIN
:
Output Gain of compressed signal. [0dB – 24dB]
_______________________________
FEEDBACK EFFECTS
A collection of 13 different effects could be invoked in the delay feedback path. Feedback effects are equal or altered
versions of pre/post effects. All effects share the enable/disable button. Most effects also share the “MIX” parameter
which sets the ratio of dry/wet signal in the range from 0%-100%. These are not further explained in the individual effect
descriptions. These are the effects which differ from the pre/post versions.
SATURATION/RECTIFY/DESTROY/NOISE
GAIN:
Gain factor on input signal. [0% - 100%]
FREQ:
Cutoff frequency of the post gain stage multi-mode filter. [50Hz - 20kHz]
MODE:
Filter type. Available types are [Lo-pass/Hi-pass/Bandpass/Allpass].
SPREAD
:
Cutoff frequency spread factor of left/right channel. [-100% - +100%]
©
2020-2021
doc version 1.2.0
