17
_______________________________
DSP EFFECTS
The DSP effect section is divided into a PRE-Delay, a FEEDBACK and a POST-Delay section. A
detailed effect description can be found in the following section parts. A click on the effect icon
opens the effect selection page. Hovering over the display moves a rectangle which visualizes the
selected effect when clicking. Clicking on an empty rectangle closes the effect selector and leaves
your settings unchanged.
_______________________________
PRE/POST EFFECTS
A collection of 15 different effects could be invoked in the pre or post delay audio path. Pre/Post effects share the same
effects pool. All effects share the enable/disable button. Most effects also share the “MIX” parameter which sets the ratio
of dry/wet signal in the range from 0% - 100%. These are not further explained in the individual effect descriptions.
©
2020-2021
doc version 1.2.0
