Stulz Free-Air-3-IN Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 31

Stulz Free-Air-3-IN Скачать руководство пользователя страница 25

25

Free-AIr-3-IN

© STULZ SpA – all rights reserved EN/02.2018

7.3. Cleaning / replacement of components

Air Filter
To replace the air filter, open the frontal panel of the unit and replace it like it is shown in the image
below.

Fans
To replace the fans, unscrew and open the frontal panel, then unscrew fan supports and remove
them.

7.4. General appliance cleaning procedures

The metal casing of the unit can be cleaned using a detergent liquid as long as this liquid is
compatible with: PVC, polyethylene, silicone and polyester coating. Be careful not to wet the
electrical connections inside the unit.

ATTeNTION

Use of an unsuitable detergent could cause damage to the unit. Do not use acid or caustic
substances to clean any part of the unit.

Use a vacuum cleaner to remove dust. Inner parts must be cleaned with a liquid detergent and air at
a pressure not higher than 4 bar and with the unit suitably connected to ground.

«
...
23
24
25
26
27
...
»

Содержание Free-Air-3-IN
































Отзывы:

Нет отзывов