Stulz ENS 14 A Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 110

background image

© STULZ GmbH, Hamburg

DE / 06-2016 / 1000687

-

7

-

STULZ UltraSonic -System for duct humidification ENS 14 A - 18 A-

Safety

CAUTION

Risk of injury from rotating parts.

Touching rotating parts carries a direct risk of injury due from mechanical forces.
The STULZ UltraSonic ENS ultrasonic humidifier may only be installed, connected and started up by
specialist engineers..

●

Before any repairs and maintenance work, always switch off the power supply to the system and

-

the unit, and secure so they cannot be switched back on for the duration of the work.

CAUTION

General risks of injury.

•

Make sure that all persons and specialist engineers wear the appropriate protective equipment

(gloves, helmet, safety goggles) for their work .

•

Make sure that all transport, storage, installation, start-up, maintenance and disposal work is

performed solely by appropriately qualified specialist personnel. The qualification requirements for

specialist personnel are listed in section "2.3. Qualification requirements for personnel" on page 10.

•

Make sure that the unit is only opened by qualified specialist personnel.

•

Make sure that applicable documents are observed during transport, storage, installation, start-up,

maintenance and disposal. Other applicable documents are listed in section "2.5. Other applicable

documents" on page 11.

•

Units must be stationary and switched off before any work is carried out. The unit must be discon

-

nected from the mains power for any maintenance work and a warning sign affixed to prevent it

from being inadvertently switched on. Before restarting, the preparatory measures in the Installati

-

on/ Start-up section must be carried out.

•

The units may only be converted or modified following consultation with STULZ GmbH. Genuine

spare parts and parts/accessories approved by STULZ GmbH are a guarantee of safety.

•

Never operate the system without the necessary protective covers.

•

Before any work on the electrical installation, switch off the power supply to the unit and all connec

-

ted components and secure so they cannot be switched back on.

•

The regulations from professional associations must be complied with.

VORSICHT

Danger of death. Electric shock risk.

There is an immediate danger of death from electric shock if live parts are touched.
The STULZ UltraSonic ENS ultrasonic humidifier may only be installed, connected and started up by
specialist electricians.

●

To change the settings of DIP switches or to remove the connections, always switch off the power

-

supply to the system and the unit, and secure so they cannot be switched back on for the duration

of the work..

WARNUNG

DANGER

2.2.

Basic safety instructions

«
...
9
10
11
12
13
...
»

Содержание ENS 14 A















































































































Отзывы:

Нет отзывов

Похожие инструкции для ENS 14 A

Бренд: NANO Страницы: 26

Бренд: NANO Страницы: 26

Бренд: Bionaire Страницы: 2

Бренд: HTW Страницы: 56

Бренд: Lowry Страницы: 22

Бренд: Soleus Air Страницы: 16

Бренд: Taurus Страницы: 24

Germ Defense EE-8065

Бренд: Crane Страницы: 12

HD306 - annexe 1

Бренд: Haier Страницы: 18

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 8

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 24

HD308 - 30 Pint Capacity

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 13

Бренд: Haier Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды