manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 678 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 678

 

 

Vista Digital Mixing System

 

 

Date printed: 20.08.09 

SW V4.1 

Software V4.1   17 

 

 

 

  •

 

Setup with the OnAir configuration tool also on the Vista side. 

 
 

A.5.8

 

 IP 

Addresses 

 

  The IP addresses of the SCore Live bridge cards should not be changed. 

They are always set to 

192.168.1.60

 for the primary network port, and to 

192.168.2.60

 for the secondary network port. 

 

  Please refer to 

chapter 9

 for network examples with Vista and OnAir 

consoles in a RELINK setup. 

 
 

Note:

 

In case of a network design where more than one Vista console communi-
cates with its SCore through one and the same Ethernet switch, the IP ad-
dresses may be changed as with the OnAir console range. But then the 
Vista’s 

D950System.ini

 files need to be adapted accordingly. 

 
 

A.5.9

 

  Audio Sync for all Systems  

 

  All systems being part of the network that can exchange audio via tie lines 

must be properly synchronized. The best option to do this is having a 
Studer D21 MasterSync unit feeding word clock in a star configuration to 
all the systems involved. 

 

  If a single system cannot be synchronized, either AES/EBU cards with 

SFCs or analog cards have to be used for tie lines. 

 
 
 

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов