manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 651 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 651

Vista Digital Mixing System  

 

24   Software V4.0

 SW 

V4.0

 

Date printed: 17.06.08

 

 

CENTER On/Off [10]

 

On/off selector for center channel use. 

 
 

CENTER [11] 

Center channel percentage control; 0% = no center channel use (phantom 
center), 100% = center channel fully active. 

 
 

FRONT WIDTH On/Off [12]

 

Switches the FRONT WIDTH function on/off. 

 
 

FRONT WIDTH [13] 

The FRONT WIDTH parameter is used to control the width of the front 
signal. It is only functional if there is a difference between the left and right 
input channels. FRONT WIDTH operates over a range from 0% (mono) to 
200% (“super stereo”).  

 
 

F/R DEPTH On/Off [14]

 

Switches the F/R DEPTH function on/off. 

 
 

F/R DEPTH [15] 

The F/R DEPTH parameter is used to control the depth of the surround 
space. It is only functional if there is a difference between the front and the 
rear input channels. F/R DEPTH operates over a range from 0% (zero 
depth) to 200% (“super depth”).  

 
 

REAR WIDTH On/Off [16]

 

Switches the REAR WIDTH function on/off. 

 
 

REAR WIDTH [17] 

The REAR WIDTH parameter is used to control the width of the rear sig-
nal. It is only functional if there is a difference between the left and right 
input channels. REAR WIDTH operates over a range from 0% (mono) to 
200% (“super stereo”).  

 
 

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов