manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 555 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 555

Vista Digital Mixing System  

 

 

8-32  Vista 8 Differences

  

SW V3.5

 

Date printed: 05.04.2005

 

 

Enable Trim Mode:

 

When pressing-and-holding the 

ISO

 key on the channel strip followed by 

touching individual controls (e.g. faders, rotaries), their state can be iso-
lated from snapshot recalls. If this option is on, the particular parameter 
may be touched a second time. This will set it into Trim mode. In this 
mode all changes to that parameter since the last snapshot recall will be ap-
plied relative (!) to all upcoming snapshot recalls – thus, not modifying 
them on disk. 

 

 

Enable Partial Snapshots:

 

Activates the “Partial Snapshot” feature. It will be possible to include only 
ganged channels when making a snapshot. Options are available within the 
snapshot window of the GC screen. 

 

 

Enable Theatre Cue List:

 

Enables extensive functionality of cue lists. 

 

 

LIVE (On-Air) arms Cue List:

 When 

pressing 

LIVE 

in the 

EXT PFL SPEAKER

 area of the Vista 8 control 

bay, the state of the cue list will change accordingly. 

 

 

Show Next Cue when Armed:

 

Defines whether the currently active or the next cue should be highlighted 
when the cue list is armed. This also allows reading the attached notes 
ahead during the live event. 

 

 

Restore Armed on Startup:

  The system will switch the console into the “armed” state whenever the 

software is started. This allows e.g. constant reception of external MIDI 
commands for firing off cues. 

 

  MIDI Show Control Device ID:

 See 

below. 

 
 

 

8.6.3.15

 

  MIDI Show Control Device 

 

 

It is possible to control the cue list by using “MIDI Show Control” com-
mands. Vista 8 acts as a slave in this case. The following “MIDI Show 
Control” commands are supported: Go, Stop, Resume, Load, Reset, 
, Standby–, S, Sequence–. 

  

Vista is designated as a Music Command Format (0x11). The MIDI device 
ID is set in the “Option: Snapshot Automation” menu. 

 

Examples: 

Next Cue:

   F0 7F [Device ID] 02 11 01 F7 

(Go command)

 

 

Previous Cue:

   F0 7F [Device ID] 02 11 12 F7 

(Standby Command), then

 

 

 

F0 7F [Device ID] 02 11 01 F7 

(Go Command)

 

 

Recall Cue 3.5:

   F0 7F [Device ID] 02 11 01 33 2E 35 F7

 (Go Command with Q specified)

 

 
 

 

8.6.4

 

 

Muting Pre-Fader Auxiliaries upon Channel Mute 

 

  A new option has been added in the “Option: Vista Settings” dialog. If 

selected, all auxiliary buses are muted if the channel 

MUTE

 key is activated. 

If this option is not active (default), only the auxiliary buses switched to 
post-fader are muting upon channel mute. 

 

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов