manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 545 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 545

Vista Digital Mixing System  

 

 

8-22  Vista 8 Differences

  

SW V3.5

 

Date printed: 05.04.2005

 

 

8.6

 

  Other Software Improvements 

 

8.6.1

 

 

Updating Multiple Snapshots 

 

 

Very often, certain parameters should be overwritten in multiple snapshots. 
It may be important that only certain parameters are overwritten and others 
are left as they are in the individual snapshots. In order to achieve this, 
place those parameters into “Isolate” mode and recall a snapshot. If this ac-
tion is now followed by an Update command, the values are changed as re-
quested.  

 

 

By using Trim mode (

see chapter 4.4.4.5

), it is even possible to apply rela-

tive changes to individual parameters of snapshots. E.g. place the fader 1 
into Trim mode and lower it by 8 dB. Recall the next snapshot and click 
Update. This will save the original value of the second snapshot, reduced 
by 8 dB, to the hard disk. 

See example 2 below 

for details. 

 

 

This can be done even faster: First select multiple snapshots and click Re-
call and Update once.  

 

Note: 

The 

Update

 button is changing its name whenever multiple snapshots are 

selected. 

 

 

 

8.6.1.1

 

  Selecting Multiple Snapshots 

 

 

Multiple snapshots can be selected at the same time by using the keyboard 

×

 

SHIFT

 and 

CTRL

 keys. The selection of multiple snapshots is following 

standard windows rules: 

×

 

SHIFT

 + click selects all snapshots in between 

the two, 

CTRL

 + click allows selection of individual snapshots.  

 
 
 

Example 1:

 

Goal:

 

The value of channel 3 should be overwritten and set to –20 dB on “Snap-
shot #1”, “Snapshot #3”, and “Snapshot #5” 

 

Procedure:

 

Place the fader to –20 dB.  

  

Hold 

ISO

 on channel strip 3. Touch the fader in order to put it into isolate 

mode. 

 

 

Select “Snapshot #1” with the trackball. 

  

Hold 

the 

CTRL

 key on the control bay, and select “Snapshot #3” and 

“Snapshot #5”. 

 

  Click on “Recall and Update”, and confirm that you want to overwrite 

these snapshots. 

 

 

The console will automatically recall and update the selected snapshots.  

 

 

 

 

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов