manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 420 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 420

D950/Vista7 Digital Mixing System

5-158 

  

Au

SW V3.3

Date printed: 27.08.03

5.18.2

 

Vista

[1]

Global 

CONTROL MODES

 (see also 

chapter 5.6

).

READ

 – Sets selected objects (depending on the Pre-Selector setting) into

Read mode.

WRITE ENABLE

 

– Sets selected objects (depending on the Pre-Selector

setting) into Write Enable mode. These parameters are “armed” and can be
put into write (record).

TRIM ENABLE

 

– Sets selected objects (depending on the Pre-Selector set-

ting) into Trim Enable mode. These parameters are “armed” and can be put
into trim (record).

ISOLATE

: Isolates selected objects (depending on the Pre-Selector setting).

These objects will not be affected by the automation.

[2]

Global Pre-Selectors for Control Modes (see also 

chapter 5.6.5.1

).

Before globally any control mode (Read, Write Enable, Trim Enable and
Isolate) can activated, the Pre-Selectors for the desired objects must be ac-
tivated. These are:

FDR

 (Fader) – all Faders

MUTE

 

– all Mutes

KNOB

 

(Encoders)

 

– all continuous controller type encoders (knobs or rota-

ries)

SWIT

 

(Switches) – all switches

HELD

 

(Held controls) – all controls that are currently in a “Held” state.

This can be any combination of faders, mutes, encoders and switches. Re-
fer to 

chapter 5.7.3

.

CLR / ALL

 

(Clear/All)

 

– Permits the changing of all Pre-Selectors at once.

If one ore more pre-selectors are active, pressing 

CLR / ALL

 

will clear all

pre-selectors.
If none of the pre-selectors are active, pressing 

CLR / ALL

 

will activate all

pre-selectors.
If 

CLR / ALL

 

and a global Mode (e.g. 

WRITE ENABLE

) is pressed, will se-

lect all controls into Write Enable (this is like Pre-Selectors are bypassed).

[11]

[10]

[9]

[6]

[5]

[4]

[2]

[1]

[3]

[12]

[8]

[7]

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов