Studer Vista Скачать руководство пользователя страница 359

Страница: 359 / 713

D950/Vista7 Digital Mixing System

Date printed: 27.08.03

SW V3.3

Au 5-97

5.11.2

Channel Patch

There are several items within the Channel Patch that may be automated.
These items may be stored as Static objects or recorded as Dynamic ob-
jects.

The following Channel Patch items may be automated:
• Input Selector: Changes to the selected channel input may be automated

(In1, In2, Gen)

• Processor Block Order: Changes to the order of the channel processor

blocks may be automated (EQ, Dynamics, Insert, Delay, and Fader)

• Dynamic Sidechain Link Setup: The addition of channels to the Dy-

namic Sidechain Link Setup may be automated

• Dynamic Sidechain Link Enable: The

Enable Sidechain Link

button

may be automated (Enable/Disable)

• Dynamic Key Input Routing: The selection of the Dynamic unit Key

Input may be automated (Channel/External)

• Direct Output Tap Location: The location from where the channel Di-

rect Output is fed may be automated (Post Input, Pre Fader, Post Fader)

• Meter Feed Tap Location: The location from where the channel Meter

is fed may be automated (Post Input, Post Fader, Direct Out Assign-
ment)

Note:

Like any other object within Au, all Channel Patch items are
Static objects until a change state is recorded in the system. Therefore,

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista

Отзывы:

Studer Vista, Руководство по эксплуатации, Страница: 359 / 713

Результаты поиска

Содержание Vista

Отзывы: