Studer Vista Скачать руководство пользователя страница 336 | Manualshive

Страница: 336 / 713

Studer Vista Скачать руководство пользователя страница 336

D950/Vista7 Digital Mixing System

5-74

Au

SW V3.3

Date printed: 27.08.03

5.8

Global Record

Controls can be “punched in and out” on a global basis. Global punch-ins
and punch-outs are accomplished in one of three ways:

1.

Manually: Using the

PUNCH-IN

and

PUNCH-OUT

activator keys on the

GLOBAL RECORD

section of the Au Panel

2.

Automatically: Enabling the Write Zone and “Auto Punch-In/Out” in
the Au window of the Graphic Controller (GC). Refer to

chapter 5.8.4

, Auto Punch In/Out.

3. Automatically via GPI input (refer to

chapter 5.8.5

).

Conditions:

If no controls of the type chosen of the Global Record Pre-Selector are

enabled, Global punch-in has no affect. Likewise, if no controls of the type
chosen of the Global Record Pre-Selector are in RECORD, Global punch-
out has no affect.

Note:

Individual controls can be punched in and out independently of the Global
Record functions. This is done locally on the channel strip or on the D950
CAS.

5.8.1

Pre-Selectors

Pre-Selectors:

Regardless of the punch method used, the Global Record Pre-Selectors
determine which controls are affected when a global punch-in occurs.

D950:

Vista:

Multiple Pre-Selectors may be active at a time. Any and all combinations
are allowed. Pre-Selectors will illuminate when active.
The following describes the control classifications as defined by the
Global Record Pre-Selectors:
•

FDR

(Fader): The fader of all channel types

•

MUTE

(Mute): The Mute of all channel types

•

ENC / KNOB

(Encoders/Knobs): All continuous controller type encod-

ers (knobs or rotaries). This does

not

include knobs that control “se-

lectors”, such as pan format, or phase inversion (for example).

•

SW

(Switches): All switches (keys) and selectors (keys and knobs)

•

HELD

(Held Controls): All controls that are currently in a “Held” sta-

tus. (This could be any combination of faders, mutes, switches, and
encoders). Refer to

chapter 5.7.3

.

Note:

If no Pre-Selectors are active, then no controls will be punched-in or out.

«
...
334
335
336
337
338
...
»

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов