manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 325 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 325

D950/Vista7 Digital Mixing System

Date printed: 27.08.03

 SW V3.3

Au   5-63

5.7.1

 

Touch and Un-touch

Touch/Un-touch Events:

Touching a Fader or Encoder is registered by the system as a “Touch”
event. Releasing the control is registered as an “Un-touch” event. Auto-
Touch+ uses these events to trigger various operations and to toggle be-
tween states.

Switches:

Switches  present a special case. This chapter discusses Touch and Un-
touch events as they apply to faders and encoders. Please refer to 

chapter

5.10

 for Switch Automation details.

Note:

It is important to recognize that Touch and Un-touch events are separate
and independent events and are used by Au in different ways.
However, Touch and Un-touch are often linked during many operations.

Examples of possible operations that can be triggered by Touch and Un-
touch events:
• Touch

-

 

Enter the enabled mode for that control (i.e. Audition)

-

 

Punch-in that control (i.e. Enable to Record)

• Un-touch

-

 

Exit the enabled mode for that control (i.e. Audition)

-

 

Punch-out that control (i.e. Record to Enable)

  Touch-sensitivity is 

always

 active on the work surface, even if 

TOUCH

RECORD

 

and/or

 

TOUCH HOLD

 are not active. It should also be noted that

when necessary, Touch and Un-touch events can be suppressed to facilitate
specific functionality.

Basic Touch/Un-touch Events:

Touch/Un-touch events can be registered without 

TOUCH RECORD

 

or

TOUCH HOLD

 engaged. These events perform the following functions when

dynamic controls are in the Control Modes indicated:
• READ: Touch/Un-touch will toggle the control in and out of

AUDITION. The control will change from READ to AUDITION when
touched and will snap back to recorded values (READ) when released.

• WRITE ENABLE: Touch/Un-touch will toggle the control in and out of

AUDITION

• TRIM ENABLE: Touch/Un-touch will toggle the control in and out of

TRIM AUDITION

• ISOLATE: Touch/Un-touch events of Isolated controls are not recog-

nized by Au.

<Option>

• With <Read Safe> checked on the Misc Options page, AUDITION

mode is defeated for controls in READ and only Read Mix values will
be heard (also refer to 

chapter 5.21.8

).

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов